OVERVIEW
Features
Simple Bolt-On Installation: Hassle-free, no-cutting installation gets you back on the trail faster.Enhanced Ground Clearance: Gain extra height for better obstacle clearance and off-road capability.Optimized Suspension Geometry: Control arm drop brackets restore proper alignment for smoother handling and improved ride quality.Corrected Coil Spring Angles: Rear coil correction plates adjust the coil spring angle by 10 degrees for increased suspension efficiency and longevity.Factory-Tuned Coil Springs: Maintain stock ride comfort with coils calibrated to the factory spring rate.Custom Shock Options: Select from nitrogen-charged N3 shocks, V2, M1 Monotube, or premium M1R shocks for a ride tailored to your off-road needs and preferences.
Notes
Does NOT fit 2-door models.2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030.On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft.Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed.If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft.Rough Country does offer this driveshaft if needed.
Install Time
Instruction
View Instruction SheetFitment
2007-2017 4WD Jeep Wrangler2007-2010 2WD Jeep Wrangler
Tire Fitment
Rough Country
