2.5IN FORD LEVELING KIT (2019 RANGER 4WD)

Code de produit : RA150100.............

OVERVIEW


Give your Ford Ranger an improved, aggressive look with Rough Country’s 2.5in Leveling kit! This easy-to-install kit levels your vehicle from front to rear giving you increased ground clearance to run larger tires while eliminating the nose-down factory look for a commanding presence that can’t be ignored.

When it comes to leveling your Ranger, a small lift can make a huge difference! By lifting the front end of the vehicle to match the height of the rear, you get an instant transformation in looks and ground clearance that’s sure to turn heads wherever you go.

Each kit features a set of front strut spacers, laser cut for a precise fit and powder coated black to resist the elements. Rough Country’s 2.5in Leveling Kit features an easy, 100% bolt-on installation process with no need for complicated strut disassembly. Includes a Lifetime Replacement Guarantee!

IN THE BOX

FRONT

  • (2) Strut Spacers
  • Hardware

FEATURES

  • Levels the front with the rear of the vehicle
  • Easy bolt-on installation
  • Maintains factory ride quality
  • Increased ground clearance
  • No need to disassemble your struts to install

NOTES - IMPORTANT

  • After-market wheels must have a minimum of 93.1mm center bore, and maximum 6.5” back spacing.
  • Wheels with less than 6.5” backspacing may require slight trimming.
  • 9” wide wheels will require trimming.

SPECS

  • Est. Install Time 2-4 hours

INSTALLATION INFO

143,95$ CAD
Prix de détail: 143,95$ CAD
  • Front Lift Height : 2.5"
  • Quantité disponible: 14

VEHICLE FITMENT

YEARS DRIVE MAKE MODEL
2019 4WD Ford Ranger
ALWAYS read all product page details for more important fitment information

RECOMMENDED TIRES & WHEELS

TIRE WHEEL BACKSPACING OFFSET
265/70R17 Factory - -
255/75R17 Factory - -
265/65R18 Factory - -
1,2285/55R20 20x9 6.5 +30mm
1Requires minor trimming
2After-market wheels MUST have a minimum of 93.1mm center bore
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation.